
Oil Gas & Chemical Processing
Products that tackle demanding situations

Cellulosic Fire
Fire Protection for civil construction

GPS
Find what you missed in Canada!
Technical Services
Practical application advice
Hydrocarbon fire protection has to respond to a very rapid temperature increase and extreme turbulence fuelled by the burning of hydrocarbon products such as oil and gas.
This type of fire is often seen in severe environmental conditions such as the oil, gas and petrochemical processing industries, placing very high demands on the fire protection coating system used.
With excellent fire protection and durability properties, Firetex thick film epoxy intumescent coatings are used to protect substrates against these onerous conditions wherever they occur. Ultimately giving you peace of mind
| Product |
Uses |
Benefits |
| M90 |
For onshore and offshore facilities with a requirement for hydrocarbon pool and jet fire protection |
- Gives up to 2 hours fire protection
- Solvent free with low water uptake
- Inherent corrosion protection
- Will last the life of the asset with minimal maintenance
- Resistant to atmospheric and chemical attacks
- Extensively tested, including UL 1709 and Den/NPD
- Used on over 400 projects across the world
|
| M93 |
For onshore and offshore facilities with a requirement for hydrocarbon pool fire protection |
- Gives up to 3 hours fire protection
- Solvent free
- Designed to give lower dft and reduced mesh reinforcement
- Reduced block outs
- Will last the life of the asset with minimal maintenance
- Tested to UL 1709 and UK/Norwegian hydrocarbon fire curve
|
| M89 |
A thermal barrier system designed to operate in extreme temperatures |
- Operating range of -75°C to +150°C
- Cryogenic splash & spillage will not shatter M89
- Extremely durable coating
- Used as a composite system with M90 to extend operational temperature range
|
| Casting System |
A removable fire protection solution |
- Individually tailored solutions for any project
|
FIRETEX - coatings you can trust
We understand the need to have excellent certification so that you can be confident when specifying FIRETEX.
All our fire protection products are fully researched using our purpose built Fire Test Centre. Then independently tested by world renowned laboratories such as Bodycoat warringtonfire (formerly Warrington Fire Research), SINTEF, UL and BAM.
To provide clients with additional confidence when specifying FIRETEX epoxy intumescent, all our fire tests are witnessed and certified by leading international Class Societies such as Lloyds Register of Shipping and Det Norske Veritas.
Our products can be seen on many projects including Phillips ‘Jade’ platform, Goldboro Onshore and Sable Island Offshore projects, Canada and the Maas Vlakte Oil Terminal.
Further Information
Brochures:M90 & M89, M93 , Castings
Application Manuals:
M90,
M93
Endorsed primers: M90 & M93
Submitting primers for approval: Submission Guide, Online Qualification Form, PDF Qualification Form
For more details call our dedicated Hydrocarbon team on +44 (0)1204 556442 and talk to someone about your individual project requirements or email hydrocarbon@leighspaints.co.uk
Back to Fire Page