| G10 |
| |
STAINLESS STEEL PLUS PAINTING WITH A TWO PACK PRIMER AND A URETHANE INTERMEDIATE & FINISH COAT |
|
| Life to first Maintenance: |
Up to 20 years in a C3/C4 Environment |
| Use/location |
Internal/most external steelwork |
| Paint manufacturer |
Leighs Paints, Tower Works, Kestor Street, Bolton BL2 2AL
Tel: +44(0)1204 521771 Fax: +44 (0)1204 534015 |
| Preparation |
Either
Or |
Flash blast with non-metallic abrasive - average surface profile in the range 20 - 30 microns
Clean and degrease and then rinse. When dry abrade, remove abrasion dust and then apply; |
Surface treatment
- Dry film thickness
- Colour
|
Metagard K570 Blast primer
50 microns nominal as defined in BS EN ISO 12944-5
Red oxide, grey |
Intermediate Coat
- Dry film thickness
- Colour |
Resistex C237 Undercoat/sheen finish
50 microns nominal as defined in BS EN ISO 12944-5
As required by the architect |
Top coat
- Dry film thickness
- Colour
- Special requirements |
Resistex C137V2 Gloss finish
50 microns nominal as defined in BS EN ISO 12944-5
As required by the architect
Alternatively Resistex C237 sheen finish can be specified |